Haze Grey 2027 VHP with Mercury 115 Pro XS

Haze Grey over Matterhorn White, a carbon-Kevlar layup, and satin black powder coat on every piece of metal. Headed to South Florida.

Haze Grey on the hull with Matterhorn White on the deck, console, cockpit, and non-skid, a black rub rail, and black navs, fuel vent, and king pins to match the satin black textured powder coat. The laminate schedule is carbon Kevlar.

Power is a Mercury 115 Pro XS Command Thrust with an Enertia prop on a Bob's 4-inch jackplate with the switch on the throttle, SeaStar hydraulic steering, and a powder-coated wheel. It turned 6,200 rpm on the wet test. A 16-inch Simrad with a transom transducer sits flush in a custom console, and up front a Simrad trolling motor rides a port-nose Power Pux mount with 36-volt power in the console and an off-board charger. A Power-Pole Blade on the port side.

The poling platform is the Go Fast style with a rod holder angled out each side, a folding backrest with a step and two cup holders tucked inside, a black-body spreader light underneath, and a push pole holder on the starboard side. Two fluted rod holders per side on the console. Grey SeaDek on the cockpit floor and poling platform, blue under-gunnel lighting, a folding cleat off the bow, and four black king pins in the cockpit corners. A cooler tie-down forward of the hatch for a Yeti 35 and a V-Marine bucket holder on the port side.

Sun Tan pleated vinyl with black stitching, hard-mounted, with a console backrest cushion and a cushion for the Yeti. V-Marine spool rod racks and push pole clips. Riding on an aluminum trailer.

Thank you for trusting East Cape with your skiff.